MCADSKILL SOLUTIONS SDN BHD



We have the following job positions available.
Please contact our HR department for more information:-

1. Mechanical Rotating Engineer
Min requirement:

Candidate shall have a RECOGNISED Degree in Mechanical Engineering with good communication skill.
At least minimum 5 years of DESIGN experience in various Rotating Equipment, including High Pressure Compressors and other rotating equipment. (experience in EPC Contracting work will be an advantage,)
Be able to work independently and able to produce Engineering specifications /Requisitions/ perform Equipment selection.
Be able to perform good engineering practices of international oil companies, in addition to international codes such as API, ASME/ANSI , NFPA, NACE, EN and ISO .
Candidates having relevant experience 3 years and above can apply.


Will be an advantage to have:

Be willing to travel and stationed at local and oversea.
Knowledge of PDMS or Cadworx / Model review is an advantage
Offshore visits experience
Site or Fabrication experience.
Perform equipment functional testat Vendor workshop’s capability


Main responsibilities:

Basic engineering design and calculation reports
Equipment pre-selection reports (for Rotating Equipment)
Technical Clarifications and Bid Evaluation Reports
Equipment Cost estimation /Weight estimation
Interface with other disciplines
Vendor Data Review/Approval / Review Manufacturer Data Report (MDR)

2. Process Engineer
Min requirement:

Candidate shall have a RECOGNISED Degree in Mechanical Engineering with good communication skill.
At least minimum 5 years of DESIGN experience in various Rotating Equipment, including High Pressure Compressors and other rotating equipment. (experience in EPC Contracting work will be an advantage,)
Be able to work independently and able to produce Engineering specifications /Requisitions/ perform Equipment selection.
Be able to perform good engineering practices of international oil companies, in addition to international codes such as API, ASME/ANSI , NFPA, NACE, EN and ISO .
Candidates having relevant experience 3 years and above can apply.


Will be an advantage to have:

Be willing to travel and stationed at local and oversea.
Knowledge of PDMS or Cadworx / Model review is an advantage
Offshore visits experience
Site or Fabrication experience.
Perform equipment functional testat Vendor workshop’s capability


Main responsibilities:

Basic engineering design and calculation reports
Equipment pre-selection reports (for Rotating Equipment)
Technical Clarifications and Bid Evaluation Reports
Equipment Cost estimation /Weight estimation
Interface with other disciplines
Vendor Data Review/Approval / Review Manufacturer Data Report (MDR)

3. Senior Piping Designer - PDMS
Min requirement:

ABLE To study and model mechanical equipment.
ABLE To co-ordinate with Mechanical engineer to ensure the all data like nozzles’ orientations are available for all equipment.
ABLE To perform pipe routing study and modeling all piping.
ABLE To study and propose pipe support locations, span and prepare pipe support attachments for issuance to Pipe Stress Analysis team.
ABLE To model OTHER items like Electrical, Instrument cable tray, Escape route, HVAC and Fire Fighting Equipment.
ABLE to implement all comments received from client, Checker, Internal Action List between Structural, Piping and revise as per comment from Pipe Stress Analysis result.
ABLE To handleall changes/mark-up onto the Master copy file.
ABLE to ensure model are clash free.


Will be an advantage to have:

Be willing to travel and stationed at local and oversea on needs basis for short-term assignment
Knowledge of Cadworx/ Model review is an advantage
Offshore visits experience
Site or Fabrication experience.
Shall have good written and spoken English language communication skills.


Main responsibilities:

Basic engineering design and calculation reports
Technical Clarifications and Bid Evaluation Reports
Equipment Cost estimation /Weight estimation
Interface with other disciplines
Vendor Data Review/Approval / Review Manufacturer Data Report (MDR)

4. Structural Engineer
Min requirement:

Degree in Mechanical Engineering
Minimum 5 years in Pipe Stress analysis in Oil & Gas and Petrochemical industries.
Knowledge of preparation of Pipe Stress Specification, Critical Line List and Stress report.
Able to use CAESAR II pipe stress analysis software.
Able to design, select and recommend various types of pipe supports – including preparation of specifications and conduct technical bid evaluations of spring supports, expansion joint and etc.
Experience in use of major oil and gas Company’s specifications and standards.


Main responsibilities:

Providing technical duties, accessing the scope of the studies required and potential risks.
Able to review and understand the technical documents during the bid phase; overseeing the bid evaluation and procurements phases.
Able to preparing the design basis for the pipeline design interface with the relative process, structures and installation.

5. Pipe Stress Engineer
Min requirement:

Degree in Mechanical Engineering
Minimum 5 years in Pipe Stress analysis in Oil & Gas and Petrochemical industries.
Knowledge of preparation of Pipe Stress Specification, Critical Line List and Stress report.
Able to use CAESAR II pipe stress analysis software.
Able to design, select and recommend various types of pipe supports – including preparation of specifications and conduct technical bid evaluations of spring supports, expansion joint and etc.
Experience in use of major oil and gas Company’s specifications and standards.


Main responsibilities:

Providing technical duties, accessing the scope of the studies required and potential risks.
Able to review and understand the technical documents during the bid phase; overseeing the bid evaluation and procurements phases.
Able to preparing the design basis for the pipeline design interface with the relative process, structures and installation.

6. Structural Designer
Min requirement:

Preferably candidate with Certificates/ Diploma.
Min 8years experience in structural design / with PDMS experience.
Familiar with international structural codes.


Main responsibilities:

Able to develop Structural PDMS in terms of development of catalogue, macros and customization.
Able to model 3D structural component in PDMS.
Able to extract 2D drawing from 3D.
Able to generate MTO, weight and COG.

7. Accounts Executive
Min requirement:

Preferably candidate with Certificates/ Diploma in accounting/ finance or part qualification from a recognized accounting body such as ACCA/CIMA or equivalent.
Min 1-2 years experience in maintaining a full set of accounts.
Knowledge of computerized accounting applications such as UBS / SAP financials will be an added advantage.
Good knowledge of Excel and database.
Strong accounting / financial knowledge.
Independent with strong management and communication skills.


Main responsibilities:

Able to prepare monthly management accounts.
Able to analyze and reconcile balance sheet items.
Able to perform staff monthly payroll.
Able to prepare monthly tax submissions and computation work.

MCADSKILL SOLUTIONS SDN. BHD.
1109, Block B, Phileo Damansara 1,
No. 9, Jalan 16/11,
46350 Petaling Jaya,
Selangor Darul Ehsan,
Malaysia.
Tel: 603-7956 9998(GL)
Fax: 603-7955 9991
Email: info@mcadskills.com

No comments:

Post a Comment

Popular Posts

Followers